FF Fibreglass Coalescerelements
General Description
Remove sub-micronic particles and aerosolized liquids from air and gas streams using the FibrCeptor FF. The quality of these process
streams impacts emissions, productivity, and product quality. Designed as a polishing filter, the FibrCeptor FF utilizes an epoxy bound
microglass casting to coalesce at the highest efficiencies. As part of a well designed gas treatment system, the FibrCeptor FF will ensure
clean, dry air/gas to your process helping to maintain optimum operational metrics.
Applications
These applications typically have lower volumes with small concentrations of contaminants making
them sensible places to use the FibrCeptor FF.
them sensible places to use the FibrCeptor FF.
- Plant Air and Instrument Gas
- Vent and Exhaust Systems
- Pre-filtered Fuel Gas and Seal Gas
Replacement Option for...
- Clark-Reliance
- Jonell
- Parker Finite
- Gardner & Clark
- Nowata
- Others
Technical Description
MATERIALS | |
---|---|
Coalescing Media | Unicast microglass |
Drain Layer Material | fiberglass |
Core Material | steel (galvanized or tin plated) |
Inner & Outer Support | steel (galvanized or tin plated) |
End Caps Material | molded silicone |
Gaskets | integral to silicon end cap |
Options | S.S. hardware, galvanized steel end caps, gasket materials |
OPERATING DATA | |
---|---|
MAX TEMP | 176°C |
MAX D.P. | 6,9 bar |
DIMENSIONS | |
---|---|
Outer Diameters | 3.55", 4.55", 6.12" |
Lengths | 12", 24", 36", 40" |
PARTICLE RETENTION | |||
---|---|---|---|
Grade | Coalescing Efficiency 0.3 to 0.6 Micron Particles |
Maximum Oil Carry Over ppm w/w |
Micron Rating |
0.1 | 99.97 | 0.008 | 0.1 |
0.3 | 98.5 | 0.2 | 0.5 |